GAS PASTA COOKER

เข้าสู่ระบบ

สมัครสมาชิก

สินค้าที่สนใจ ( 0 )

02 530 3146 , 0928536646

เข้าสู่ระบบ

สมัครสมาชิก

สินค้าที่สนใจ ( 0 )

[$Facebook]@saycook

หน้าหลัก > เครื่องใช้ไฟฟ้า > เครื่องประกอบอาหารเฉพาะด้าน > GAS PASTA COOKER

GAS PASTA COOKER

รหัสสินค้า: ZNS1-372090

Dimension W250 x D400 x H300mm

ติดต่อเรา เพื่อสอบถามราคาสินค้า

รายละเอียดสินค้า

รีวิว

Features

Main Feature

In addition to cooking pasta, the appliance can be used for noodles of every kind, rice, dumplings and vegetables.
High efficiency 10.5kW burners in stainless steel with flame failure device and optimized combustion, located below the well.
No electrical connection needed.
Water basin in 316 type Stainless steel.
Water basin is seamlessly welded into the top of the appliance.
Provided with integrated drip zone on which baskets can be placed for draining purposes.
24.5 liters water basin.
Unit to feature skimming zone for starch removal: improved water quality over time.
Easy-to-use control panel with gas cock and piezo ignition.
Safety thermostat to avoid operation without water.
Continuous water filling regulated through a manual water tap.
Large drain with manual ball-valve for fast emptying of well.
ESD available as accessory (installed separately): energy saving device uses heat produced by water drained through the overflow to pre heat tap-in water up to 60°C, for constant water boiling.
EnergyControl: unique feature for fine power adjustment to control boiling level and optimize energy consumption.
Automatic lifting system (optional accessory): 200mm wide unit with two stainless steel basket supports, holding one GN 1/2 basket each, to be placed on either or both sides of machine to provide automatic lifting for four small portion baskets (to be ordered separately). Possibility to memorize nine cooking times through digital control.
All major compartments located in front of unit for ease of maintenance.
IPX4 water resistance certification.
Unit delivered with four 50mm legs in stainless steel as standard (all round Stainless steel kick plates as option). Construction
All exterior panels in Stainless Steel with Scotch Brite finishing.
One piece pressed 1.5mm work top in Stainless steel.
Model has right-angled side edges to allow flush fitting joints between units, eliminating gaps and possible dirt traps.

Specifications

Dimension	W250 x D400 x H300mm
Standard gas delivery	11.5kW 35794.5Btu/hr
Gas type option	LPG
Gas inlet	1/2"
Drain "D"	1"
Incoming cold/hot water line size	1/2"
Total hardness	5-50ppm
Well capacity (MAX)	24.5 litre MAX
Net weight	50Kg
Shipping weight	46Kg
Shipping height	1130mm
Shipping width	460mm
Shipping depth	820mm
Shipping volume	0.43m³
Warranty	1 years
Certification
Made in	Italy